BYNMW - 44030A FLAT GREEN
- MSDS: BYNMW
- Manufacturer: DU PONT E I DE NEMOURS AND CO INC AUTOMOTIVE PRODS D
- Product Name: 44030A FLAT GREEN
- National Stock Number: 8010-00F046782
Product Identification
Product ID:44030A FLAT GREEN
MSDS Date:03/01/1996
FSC:8010
NIIN:00F046782
MSDS Number: BYNMW
Responsible Party
WILMINGTON, DE 19898-5000
US
Emergency Phone: 800-441-3637/800-441-7515
Info Phone: 800-441-7515/302-2774-9395
Cage: 90227
Contractor
Telephone: 800-441-3637
Cage: 90227
Ingredients
TOLUENE (IARC CARC- GROUP 3) *96-1*
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 8%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-HEPTANONE, METHYL N-AMYL KETONE
CAS: 110-43-0
RTECS: MJ5075000
OSHA PEL 465 MG/CUM
ACGIH TLV: 233 MG/CUM
PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
CAS: 108-65-6
RTECS: AI8925000
MEDIUM ALIPHATIC NAPHTHA (AROMATIC 100), PARAFFIN-NAPTHANES
CAS: 64742-88-7
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS: 64742-89-8
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-1*
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 19%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM, SKIN
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
HEAVY AROMATIC SOLVENT NAPHTHA PETROLEUM *95-4*
CAS: 64742-94-5
RTECS: WF3100000
TITANIUM DIOXIDE, TIO2 (SUSPECTED ANIMAL CARCINOGEN, IARC
CAS: 13463-67-7
RTECS: XR2275000
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
LEAD CHROMATE(VI) OXIDE, CR-O4-PB. O-PB; (HUMAN CARCINOGEN
CAS: 18454-12-1
RTECS: OF9800000
Fraction By Weight: 1.02%
OSHA PEL 0.1 MG/CUM
ACGIH TLV: 0.05 MG/CUM
SILICON DIOXIDE, CELITE 322, AMORPHOUS SILICA GEL *96-1*
CAS: 112945-52-5
RTECS: VV7310000
OSHA PEL 80 MG/CUM
ACGIH TLV: 0.2 MG/CUM
ALKYD RESIN *95-4*
CAS: 67922-67-2
FATTY ACIDS, LINSEED OIL, REACTION PRODUCTS POLYMER;
CAS: 96591-17-2
BUTYL ACETATE (N-BUTYL ACETATE) *96-1*
CAS: 123-86-4
RTECS: AF7350000
OSHA PEL 710 MG/CUM
ACGIH TLV: 713 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOBUTANOL, 2-METHYL-1-PROPANOL, ISOBUTYL ALCOHOL
CAS: 78-83-1
RTECS: NP9625000
OSHA PEL 300 MG/CUM
ACGIH TLV: 152 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 3%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION,
CNS DEPRESSION. REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS MAY
CAUSE PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. SKIN:
IRRITATION/BURNING, DERMATITIS. EYES: IRRITAT ION/BURNING.
XYLENE-RECURRENT OVEREXPOSURE MAY RESULT IN LIVER & KIDNEY INJURY.
ABSORBED THROUGH SKIN IN HARMFUL AMOUNTS
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, BURNING, DISCOMFORT.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR, PREFERABLY
MOUTH-TO-MOUTH. SKIN: WASH W/SOAP & WATER. EYES: IMMEDIATELY FLUSH
W/PLENTY OF WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:20-73F
Lower Limits:0.8
Upper Limits:13.1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT W/SCBA. WATER
FROM FOG NOZZLES MAY BE USED TO PREVENT PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE THE FLASHPOINT, EMITS
FLAMMABLE VAPORS WHICH, WHEN MIXED W/AIR, CAN BURN/BE EXPLOSIVE.
FINE MIST/SPRAYS MAY BE FLAMMABLE AT TEMP
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE IGNITION SOURCES.
PREVENT SKIN CONTACT & BREATHING OF VAPORS. CONFINE & REMOVE
W/INERT ABSORBENT.
Handling
Handling and Storage Precautions:KEEP FROM HEAT, SPARKS & FLAME. CLOSE
CONTAINERS AFTER EACH USE. GROUND CONTAINERS WHEN POURING. DON'T
STORE >120F.
Other Precautions:DON'T SAND, FLAME CUT, BRAZE/WELD DRY COATING W/O
NIOSH/MSHA APPROVED RESPIRATOR/APPROPRIATE VENTILATION. DON'T
BREATHE VAPORS/MISTS.
Exposure Controls
Respiratory Protection:WEAR A PROPERLY FITTED VAPOR/PARTICULATE
RESPIRATOR APPROVED BY NIOSH/MSHA, FOR USE W/PAINTS DURING
APPLICATION & UNTIL VAPORS & SPRAY MISTS ARE EXHAUSTED.
Ventilation:SUFFICIENT VENTILATION IN VOLUME & PATTERN TO KEEP
CONTAMINANTS BELOW EXPOSURE LIMITS.
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES, SAFETY GLASSES W/SPLASH GUARDS
Other Protective Equipment:SAFETY GLASSES W/SIDE SHIELDS, PROTECTIVE
CREAMS FOR EASE OF CLEAN UP, COVERALLS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING & BEFORE
EATING/SMOKING.
Supplemental Safety and Health
Chemical Properties
Vapor Density:>1
VOC Grams/Liter:5.
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:73.5
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, FLAMES, TEMP >120F.
Hazardous Decomposition Products:CO, CO2, SMOKE, OXIDES OF HEAVY METALS
Disposal
Waste Disposal Methods:DON'T ALLOW TO CONTAMINATE GROUND WATER SYSTEM.
INCINERATE ABSORBED MATERIAL IAW/FEDERAL, STATE & LOCAL
REGULATIONS. DON'T INCINERATE IN CLOSED CONTAINERS. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULA TIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.